If there’s any water leaking, you’ll need to drain and re-seal the leaky spots before filling it again for another test. Give the test a few minutes before declaring it a success. Seal the holes where the hoses are with plumping putty.įill the tank up and check for leaks. Once you have the holes drilled, attach the hoses, and set the pump up. Stepped drill bits cut a wide range of hole sizes, so you’ll need to be careful not to drill the holes too big.

Find out which size hoses the pump and filter you buy require, then shop around for a stepped drill bit that can cut the size you need. Complete the sealing process by adding some plumbing putty around the edge of the hose bib.Ī post shared by Your Stock Tank Pool Resource next step requires you to cut new holes in the stock tank for the pump and filter ports. Don’t forget to wrap the new hose bib in plumber’s tape to ensure a leak-free connection. Replacing the standard plug with a hose attachment will allow you to attach a hose and have more flexibility as to where you drain the pool. Replace the plug with a hose bib with a shutoff switch that has a similar thread pattern. Next, you’ll need to remove the drain plug that was originally in the stock tank.

Next, you’ll need to make sure you’re able to plug in the filter pump, so an outlet should be somewhat nearby. First, plan on putting the drain port somewhere where the land can handle several hundred gallons draining over it in a relatively short amount of time. There are a few other things you’ll want to consider in regards to your stock tank location. Having a smooth, level, and solid surface that can handle the weight of a filled stock tank pool is imperative we recommend compacted sand or paved patio. When you’ve chosen your desired spot, proceed with making sure that it is solid, and has a level base. Once you purchase the stock tank pool, you’ll need to scope out a home to place the pool. If you’re not keen on a round stock tank, capsule-shaped stock tanks are also available for purchase but are narrowly shaped, perfect for soaking. Keep in mind that stock tanks come in an assortment of sizes ranging from three-feet to 8-feet in diameter with a depth of about two feet at an average price of $300.00. Where To Buy A Stock Tank PoolĪlthough a stock tank pool won’t be as cheap as an inflatable pool, it will cost considerably less than your average above-ground-pool, making it an appealing alternative for many homeowners.įirst, you’ll need to purchase a steel water trough or stock tank at your local farm supply store, Tractor Supply, or online at TankAndBarrel. Stock tanks will need some MacGyvering to transform this into a trendy backyard oasis, that’ll have your friends and neighbors wanting to join in on the fun.

These humble yet stylish, Instagram photo-ready pools will add some serious curbside appeal that a traditional above-ground-pool or chintzy inflatable kiddie pool could never do.īefore you get too excited about purchasing a stock tank pool, be aware that it’s slightly more involved than just plopping down an everyday farm staple in your backyard, filling it with water, and calling it good. A post shared by Your Stock Tank Pool Resource looking to beat the summer heat, without dropping a lot of cash should consider repurposing a galvanized steel livestock water trough, into a down-home, country chic stock tank pool.

Stock tank pool